Question: Is 18 Inches Deep Enough For Fence Post?

How big of a hole do I need for a 4×4 post?

Dig an 8″-diameter hole at least 6″ deeper than your area’s frost line for each 4×4 post, using a power auger, hand auger, or post-hole digger..

How deep should a 6ft fence post be?

600mmFor example, if you have a 3 inch wide post that you need to sit over 1.83m (6ft) in height above the ground, we recommend the hole size should be: 230mm [wide] (9”) x 600mm [depth]. This rule of thumb that can be followed for all size posts (e.g. a 6ft high fence would require a hole depth of at least 600mm or 2ft).

How do I stop my fence post from heaving?

Use spray paint or stakes to mark out all posts. Using a hole auger or post hole (clamshell) digger, instead of a shovel, will create flat-walled, barrel-shaped holes. Posts need to be set below the frost line to prevent heaving.

What is the minimum depth for a fence post?

Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).

How deep should a 5 foot fence post be?

Keep the height of your fence in mind when digging your post holes. As a general rule of thumb, you’ll need to place at least 1/3 the height of the post in the ground. For example, a 6-foot tall fence will need at least 2 feet of post in the ground.

Should I use concrete for fence posts?

Setting Fence Posts in Concrete Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Gravel may be okay with dense, clay-heavy soil, but in looser soil, concrete is the only thing that will truly keep your fence posts stuck in place.

Is 1 foot deep enough for fence post?

Determining Post Length You should always bury one-third of your fence post underground. … This means that unless you are building a 2-foot fence, which is unlikely in any garden, a 1-foot hole will not be deep enough to support your post. For main and gateposts, you should dig the holes an additional 6 inches deep.

How do you keep fence posts from rotting in concrete?

Caulk around the fence post baseSoak the bottom of the posts in a wood preservative containing copper napthanate, such as Cuprinol. … Place about 6 in. … Pour the concrete so that it’s above the soil level.More items…

Can you put dry concrete in a post hole?

Fast-setting concrete is ideal for setting posts because there’s no mixing—you simply pour the dry concrete from the bag right into the hole, then add water. … Under normal curing conditions, you can apply heavy weight to the post (a basketball backboard, for example) after just 4 hours.

Will wooden posts rot in concrete?

With concrete holding the moisture against the wood, wood has no chance and will eventually lose the battle. Now you don’t have to lose all hope because it’s for certain that the concrete around the post will crack, therefore making it easy to pull out when it starts to rot. Even worse, the concrete cracks early.

How long will 4×4 post last in the ground?

If you find the RV posts I mentioned earlier, they are steel, treated and when put in concrete will last 25 years or more. It will not last long (7 yrs max) if the bottom of the post is wet. If you place stone at the base of the post, it should last 20+ yrs.

How tall can you make a privacy fence?

However, if you desire to add privacy to your yard then your fence will need to be tall enough to block out neighbors’ views. Privacy fences are usually between 6 and 8 feet tall. Fence height is also important if you are seeking to contain dogs.

Should I use 4×4 or 6×6 fence posts?

Instead of 4×4 posts, go with 6×6 posts. The extra size makes a huge difference. It’s a smart place to invest a little extra in your fence, because if your posts distort after they have been set in the ground with concrete, they are extremely difficult to replace.

Is 2 feet deep enough for fence posts?

The minimum depth that you should dig your fence post holes for panel sections is 2 feet. A general formula is to dig the holes one-third to one-half of the post’s aboveground height. The deeper you dig the holes, the more stability your fence has, but you must also purchase longer posts.

How many bags of concrete do I need for a fence post?

Mix two 50lb bags of concrete with water in a mixing tub or 5-gallon bucket. Add concrete into the hole and around the 4” x 4”. Depending on your climate, let concrete set up for 24 – 48 hours.

How deep should post be for 8 foot fence?

The depth of the post hole needs to be 1/3 to 1/2 the height of your fence. For example, if you are building a fence that’s 6 feet tall, you will need a hole that is at least 2 feet deep. That also means that you’d need to use an 8-foot post. The hole will need to be about 3 times the width of your post.